Видео

Thanks 👍

This is an EXTREAMLY helpful video. Covers everything in simple detail. Thanks so much.

Helpful

good idea, always looking for an easier way to fix inground breaks, Thanks

Very inspiring! Thanks for all your hard work. I’m definitely going to do this myself.

Happy your video is still up. Will try your soldering method tomorrow.

Many thanks. Great video.

For anyone one looking for the thread size on the headstock shaft it's a M-18 mm Also I got a peace of 3/4 x 10" X 5' and ripped it down to 7 3/4 wide then cut the top corners out with a router the length of the bord, took a mallet a tapped the bord into the sheet metal base with 1 inch sticking out each end to clamp or screw to table. Many e this will help someone out.

My toaster won't work it's new rarely used it also can boil eggs and it's not the fuse what else could it be tks

I already found a few channels in which Germans has motors in both wheels. They use the bikes to pull a little trailer in which they camp. It got a bed, a heater and solar panels for electricity.

netting works great. however i broke my back when i got tangled up in it and fell off the roof trying to put it on !! 😆😆😆

Thanks. Very helpful. Just replaced my doorbell.

Absolutely the BEST video for getting the dishwasher back to life. Ours is a 15-year old Kenmore QuietGuard, but essentially the exact same layout & process. The hardest part is having the correct Torx bit, which I did. Thanks so much!!

AWESOME!! Thank you🙏❤

I have a 256gb SSD in my 2017 iMac (it was the optional upgrade at time of purchase) so would I need the thermal sensor as well? I'm going to upgrade to a 2TB as you have as there's nothing wrong with this computer outside of storage.

Presto! Just needed this video. Thanks for a thorough, step by step instruction.

Thank you for pointing out that we should tap the screw holes beforehand. You saved me from flying off the handle if I wouldn't of otherwise.

I thought the white ones where for the COM wire HOT wire and the rest for each station

2024. This was so helpful you guided step by step. Now I don’t have to reach out to my landlord!! Thankfully using the tool at the bottom worked for me.

nice video . thanks

sweet! thank you, great instructions

it’s currently 1am and this video literally saved my sanity thank you so much

I wish i found you first as you have all the possibilities in one.

Same board on my 2008 Craftsman opener. Suddenly my opener was forgetting my remotes. I check out your video and although I didn't see an issue with the solder joints, I added some liquid flux and hit them with my soldering iron. Now it works great. Thanks you really helped me out.

Simply, thank you.

How do you know what is a good brand?

Thank you!

I can't figure how to remove the little knob at top of filter apparatus 😭 mine seems stuck

You can ditch the screen as you have left a gap on the bottom they can get in.

Ur a legend

WARNING best gaslighting toy ever!

Thank you!

Got no light bulb screwed in that would be a good one cuz I don’t think I could get 4 fins to do the job

Can or will it operate without safety eyes or different than openers brand name ?

Thank you

after watching video and video showing how the blades moved then in your video you showed that whole plate that the blades were sitting on rotating i went and tried that and there was some resistance and after a little push whatever it was broke down and went through or whatever and blam it works again so Big THUMBS up for your video Thank you Adam!!!👍

I have a whirlpool stove and I took the door off today (and put it back on) without any problem whatsoever. Apart from that, perhaps give some thought to cleaning that oven.

It's that time of year again! I watch your videos every spring and fall. Thanks for making these. Best tutorial on RUclips. Cheers from Herriman, UT!

THANK YOUUUUUU!!! 🙏🏻😁

Brand new oven. Pilot will not stay lit. Can I switch out the coupling rather than cleaning it?

Perfect! My red sensor on the floor was blinking. I didn't know it shouldn't and I got intermittent problems. Fixed that in seconds and all is well. Thank you. You're video is a very easy trouble shooter. ❤

Thank you so much! Your instructions are very clear.

Thanks Man for such a good information

What are those blinds? I am looking for that style of mounting bracket blinds and can’t find them. I can find the regular brackets though.

If you’re one of those people who leave their hose connected to the water spigot over the winter, plastic connectors won’t “weld” themselves to the spigot like metal ones could. Then again, don’t be lazy in the fall and disconnect your hose before the cold weather sets in. 😂

10 years and your video is still useful thanks !

Thank you for the video. Your instructions on how to test with the multimeter and how to fix were perfect

My Worx trimmer still chews up the string every time.

Thanks l just needed a new battery in my voltmeter ❤

I'm so glad I found this video because that is exactly what my dishwasher looks like inside BUT it is covered in funky water right now. My garbage disposal is broken and sometimes that side does not drain well because of food particles(I guess) and now I'm not sure if I should try to run my dishwasher and see if it drains or scoop the water out and have my husband replace or fully remove the disposal asap 😢